Shenzhen Hopetime Industry Co.,Limited
Shenzhen Hopetime Industry Co.,Limited

3D printing material introcution of Plastic

3D printing material introcution of Plastic


1.POM(Delrin/Acetal)
--High stiffness, high accuracy, low friction, easy to machine.
--POM is an engineering thermoplastic used in precision parts.Requiring high stiffness, low friction, and excellent dimensional Stability.

2.Nylon
--Excellent mechanical properties, thermal, chemical and abrasion resistant.
--Nylon - polyamide (PA) - is an engineering thermoplastic with Excellent mechanical properties and high chemical and abrasion Resistance.

3.ABS
--Common thermoplastic, impact resistant, easy to machine.
--ABS is a common thermoplastic with all-around good mechanical Properties, excellent impact strength, good heat resistance and Good machinability.

4.PEEK
--High-performance thermoplastic, very high strength, thermal and chemical resistant.
--PEEK is a high-performance engineering thermoplastic with Excellent mechanical properties and chemical over a very wide Temperature range.

5.PTFE(Teflon)
-- Low friction, chemical and thermal resistant.
--PTFE is an engineering thermoplastic with excellent chemical And thermal resistance and the lowest coefficient of friction of Any know solid.

6.Polycarbonate
--High toughness, excellent impact strength, transparent.
--Polycarbonate (PC) is a thermoplastic with high toughness, Excellent impact strength and good machinability. Can be optically transparent.

7.Polyethylene
--Excellent strength-to-weight ratio, impact and weather resistant.
--Polyethylene (PE) is a thermoplastic with high strength-to-weight ratio, good Impact strength and excellent weather resistance.

8.PVC
--Excellent chemical and weather resistance and good toughness.
--PVC is the third most used plastic with all-around good mechanical properties, Excellent chemical and weather resistance and good toughness.

9.PMMA(Acrylic)
--Transparent rigid plastic often used as a substitute for glass.
--PMMA is a transparent rigid plastic often used as a substitute for glass.

10.PET
--Tough plastic that offers excellent wear resistance and mechanical strength.
--PET is a tough plastic that offers excellent wear resistance and mechanical Strength.

11.Polypropylene
--Excellent chemical resistance. Food-safe grades available.

12.G-10
--High strength, low moisture absorption, and high level of electrical insulation and chemical resistance.
--G-10 is a high-pressure fiberglass laminate with a high strength, low moisture Absorption, and high level of electrical insulation and chemical resistance.

13.FR4
-- Flame retardant glass fiber epoxy laminate.
--FR4 is a class of glass fiber epoxy laminate that is flame retardant, with similar Properties to G-10.

Click at here:3D printing material introcution of metal
Click at here:Common used 3D printing material introcution 

Contact Us

E-mail: [email protected]

E-mail: [email protected]

Skype: [email protected]

Whatsapp: +86 15012972502

Add: Block B,Phoenix Century Garden,Fuyong Town, Baoan district,Shenzhen China 518103

Link