Immersion tin thick copper PCB 6oz high TG170 4 layer industry control circuit board

1.Introduction of Heavy copper PCB

Heavy copper PCB is identified as a PCB(Printed circuit board) with a copper thickness 3 oz per ft2 to 10 oz per ft2 in the outer and inner layers.The copper concentration can be as high as 200 ounces per square foot.A heavy copper circuit is manufactured with copper weights anywhere between 4 oz/ft2to 20 oz/ft2.Heavy copper PCBs are widely used in electronics and electrical circuitry where high power transmission is needed.and a 4 oz Copper PCBs are most commonly used in commercial products. When the electronic device need high power or current through, Then we need consider heave copper to control the thermal on PCB.

The improved copper weight, along with a thicker plating and appropriate substrate in the through-holes can change a weak board into a long-lasting and dependable wiring platform. Heavy copper conductors can increase the entire PCB thickness considerably. 

copper plating has couples of merits like terrific conductivity, thermal conductivity, mechanical ductibility, etc, which refers to Immersion copper after drillling + Plating the whole PCB+ Thicken the circuit with copper, all of which are to guarantee the conductivity; Besides, the common plating solution is CuSO4;

In short, the whole process is like this: Drilling—Immersion Copper—Plating—Drawing—Etching.

 

PCB project specific:(thick copper PCB 6oz)
PCB Layer:4L
PCB material:FR4,TG170
Board thickness:1.6mm±0.15mm
Surface treatment:Immersion Tin
Finished copper thickness:6OZ
Min trace/gap:20/23mil
Min hole size:1.25mm
Copper wall thick:25.4um
Special technical:Heavy copper,thick copper hole
Application:industry control

3.Stack up - thick copper PCB for reference only.


4.Capability-thick copper PCB


If any inquiry,Always welcome here!