Rogers RO4003C PCB 4 Layer RF circuit board

Why use Rogers material?
High frequency PCBs and RF PCBs often need high performance with low signal losses, low electrical noise, or high board temperatures. To meet this need Rogers Corp. PCB materials are often used as they are cost effective vs. many of the alternatives.Rogers series is often used in RF PCBs with frequencies 6+ GHz and in high heat applications that need ceramic laminates and low signal losses. It may also be used to minimize electrical noise to meet stringent performance requirements.

Some of our RF circuit board Project photo



What are RO4003C Rogers circuit board?

1.Dielectric Constant is 3.38 ± 0.05

2.Dissipation Factor is 0.0027

3.RO4003C materials are reinforced hydrocarbon/ceramic laminates - not PTFE.Designed for performance sensitive, high volume applications.

4.Low dielectric tolerance and low loss PTFE.

5.Low thermal coeffi cient of dielectric constant

6.Volume manufacturing process

Some Typical Applications for Rogers RO4003C PCB:

• Cellular Base Station Antennas and Power Amplifiers

• RF Identifi cation Tags

• Automotive Radar and Sensors

• LNB’s for Direct Broadcast Satellites

Thickness for RO4003C Material sheet:

0.008” (0.203mm),

0.012” (0.305mm),

0.016” (0.406mm),

0.020” (0.508mm)

0.032” (0.813mm),

0.060” (1.524mm),

*Please send inquiry to [email protected] directly!!!